Are you interested in a technical consultancy
and a demonstration at your location?
We look forward to your inquiry!

+49 2663 8210 information(at)mk-gmbh.de

The Mobile Test Unit ALSP basic used to determine the quality of the melt based on the measurement of the density index.

Information on process:


The ALSP basic is designed to maximise the efficiency and convenience of working processes. The special shelf for the pouring ladle (supplied with the unit) and the water vessel for cooling the samples (set into the working surface) are situated conveniently close to the operator. The Density Index Balance MK 3000 stands on the test unit, but can be moved to a different location if required. The unit's sub-frame also has three large storage compartments. The smooth-running and heat-proof wheels make the ALSP basic a flexible and versatile aid at the different casting stations or furnaces.

The advantages of a chamber are described in the section pre-heating chamber are described in the section ALSP plus.

Special features:

  • Flexible use at different casting stations or furnaces
  • Convenient and efficient working
  • Vessel for cooling density samples provided
  • Shelf and storage space
  • Process reliability through fully electronic control:
  • - fully automatic control of vacuum to 80 mbar
    - leakage indicator
    - cycle counter
  • Exact calculation of density to four decimal places (0,0000 g/cm³)
  • Interface for transfer of density index results to:
  • - PC Software supplied
    - optional Memory Box
  • Capable of 100% calibration
  • CE conformity
  • Tested to DGUV standard

The PC Software supplied permits the following operations:

  • Saving of measurements
  • Use of statistical process control (SPC)
  • Analysis and assessment of data by means of various filters for the density index results
  • Printable reports
  • Results exportable to MS Excel

Previous model to ALSP basic:
ALSP I

Warranty

12 month warranty within Europe.

6 month warranty outside Europe.

Scope of delivery

  • 1 Ladle, 500 mm
  • 1 Crucible tong
  • 2 Crucibles
  • 1 Insulation brick
  • 1 Power unit
  • 1 Data transfer cable
  • 1 Plastic set-up
  • 1 PC Software

Technical data

Design: Mobile Test Unit of powder-coated hot-galvanised steel plate with three storage compartments, two fixed and two guiding wheels with brake
Dimensions: W 1020 x D 700 x H 1360 mm
Weight: approx. 110 kg
Power connection: power cable with plug, 230 V, 1400 W, 6,3A, 50-60 Hz, (115 V available on request)
Power consumption: 1400 VA
Vacuum pump: oil-lubricated vacuum pump
Timer: electric short-period timer (1-99 min. or endless = 00) integrated in display
Vacuum chamber upper part: incl. safety inspection glass


Electronic Density Index Balance MK 3000:

Design: Powder-coated aluminium die-cast housing incl. plastic set-up
Dimensions: W 230 x D 350 x H 230 mm (incl. plastic set-up)
Weigh: approx. 5,5 kg
Plastic set-up: of impact-proof plastic
Weighing range: 3.000 g
Resolution: 0,01 g
Reproducibility: 0,01 g
Stabilising time: 3 sec.
Ambient temperature: 0-40°C
Mains voltage: 100-240 VAC, 50-60 Hz
Power consumption: 10 VA